You might be asking yourself what pump saver is, especially if you don’t usually deal with this type of tool or with pressures washers in general. However, if you are more familiar than this piece of equipment can be both efficient but also save you lots of money in the long run when it comes to repairs and maintenance.
Pump Saver is a special applicant that is applied to the internal parts of a pressure washer pump to ensure that the useful life of the device is extended over long periods of time, especially when the pressure washer has to be placed in storage in areas where it will not be serviced for a while or not be used for a number of months.
What are the steps to applying pump saver?
There are a series of steps that you should follow when applying pump saver to your pressure washer when you want to store your pressure washer or protect it against the effects of the weather. The steps required are quite simple and should provide you a number of benefits that you cannot afford to miss out on:
- First identify the pump inlet and outlet to your pressure washer.
- Flip the top off of the can of pump saver.
- Place your finger on the top of the pump saver bottle.
- Hook up the end of the pump saver tube nozzle to the pump inlet.
- Hold down the pump saver button to dispense the lubricant
- Hold down the pump saver button until you see lubricant leaving the pump outlet
If you have followed these steps then it should be clear that you have applied the pump saver properly, and that your pressure washer has been lubricated. The time it takes to apply the pump saver may vary depending on the pressure washer that you use. It should not take more than a few seconds.
Key Takeaway: If it is taking a considerable amount of time to see any results then that may be an indication of the condition of your pressure washer. If this is the case then it is advised that you take your pressure washer to the nearest professional or preferred professional location so that they can accurately and effectively investigate for you.
What pump savers are the most suitable for me? Comparison Chart
Comparison Chart
There are different brands and varieties of Pump Savers that can all be applied to the same scenario and types of machinery however some have small slight differences when compared to each other. Here is a selection of a few to give you an idea of the different types of Pump Savers and make it easier to select the best one for you:
Karcher 9.558-998.0 Gas and Electric Pressure Washer’s Pump Guard (16oz)
Designed to prolong the life of your electric or gasoline pressure washer, this pump guard will help to protect from corrosion and premature wear on your pressure washer parts. Additionally it has freeze protection that protects down to -25 degrees Fahrenheit, as well as adding lubrication to the pressure washer valves and seals.
Reviewers find that this pump saver works effectively well as an unpressurized bottle of preservative when compared to others which are pressurized which ends up wasting more of the product than necessary. The lubrication and anti-freeze features are also considered to be a big plus to the product and its usefulness.
Some purchasers have had trouble properly applying this pump saver to their pressure washer and seem to require extra instructions as to how to effectively do this as it ends up wasting the material that is inside it. Additionally there has been a case of the pump saver evaporating quickly but this seems to be a controlled case.
Briggs & Stratton Pressure Washer Pump Saver – 4 Oz. 6039
This pressure washer pump saver also contains a unique anti-freeze and lubricant formula that will effectively help it to keep your pressure washer safe from the lower temperature colds that cause freezing as well as ensure that it can be actively revived after months in the shed and a lack of operational use.
A lot of purchasers have found this pump saver to be very effective at prolonging the useful life of their pressure washer due to the ability for it to be used as a lubricant alongside long time maintenance oil. It has been touted as helpful in keeping a good machine running for a much longer time as well as without maintenance hassle.
Once again there have been issues with the instructions of application not being entirely clear and some purchasers having difficulty in applying it properly, resulting in them wasting the product and providing negative feedback in their review. There is reason to believe that proper application will provide much more positive results.
AR North America Pressure Washer Pump Saver
A specific North American brand created by the company known as A.R. North America, this company deals with the creation, distribution and maintenance of pressure washer pumps and pump accessories. Aside from pump saver it has a variety of different components for pressure washers if you’re ever in the need for more parts.
This bottle of pump saver comes in a 16-ounce container and features an anti-freeze solution, perfect for storage in cold climates and cold areas where components of the pressure washer can succumb to freezing as a result of subzero temperatures, a particular problem in northern parts of the United States.
Some issues have previously been found with the purchasing online with the product arriving damaged and effectively unable to be used. This is an occurrence that can happen with all forms of online ordering however it should not be too greatly considered when making the purchase for a product.
Conclusion
With this information taken into consideration on how to apply the pump saver to your pressure washer as well as some tips on what types of pump saver you might want to purchase, hopefully you should have a better idea on how to maintain your pressure washer to ensure that it lives longer and can continue to get the job done.